Lexar Professional Go Portable SSD with HUB 1TB, Ultra-Compact,Up to 1050MB/s Read and 1000MB/s Write, USB 3.2 Gen 2,for iPhone 15/16, Silver
Lexar Professional Go Portable SSD with HUB 1TB, Ultra-Compact,Up to 1050MB/s Read and 1000MB/s Write, USB 3.2 Gen 2,for iPhone 15/16, Silver is priced at £199.99 — stable over the last 30 days.
- Note: In order to ensure that this product does not wobble and become unrecognised when plugged into the end of a mobile device, Lexar has customised a USB Type-C connector for the GO with a plugging force that is twice as high as the industry standard (20-40N force), to make it even tighter, so when connecting a portable SSD, please apply moderate force and make sure that the device recognises it before clicking on it to start working
- The portable SSD plus the hub, which has its own four USB Type-C ports, along with included adapters and cables, gives you the ultimate flexibility to customize your setup to suit the shoot
- Ultra-compact so you can always keep it with you for spontaneous creativity anytime, anywhere
- Capture brilliant Apple ProRes footage and store with ease, cable-free plug-and-play Type-C connector frees you from tangled, cumbersome cables
- Ready for travel –dust-proof and water-resistant (rated IP65), and drop-resistant up to 1 meter
About This Product
Product Description
1 Apple ProRes 2 Mini Size 3 Versatile Hub 4 On the Go 5 Endurable IP65
1 Note 2 Package Content 3 High Speed 4 Easy for Use Why can't my device recognize the Lexar Professional Go？ If it is not recognized, you can plug the interface tighter until it is recognized. Can I use my mobile phone with a case? The silicone sleeve included with the SL400 supports cases up to 1.6 mm thick. Without the silicone sleeve, the case can be up to 2.6mm thick.
If the case is thicker than 2.6mm, we recommend using a USB Type-C cold shoe adapter cable Why is the device not recognised when connected through the HUB, but normal when not connected to the HUB? 1. Hub interface connection does not correspond to the uplink port: only the uplink port is connected to the device
2. Hub interface and the cable is not plugged into the end
3. Insufficient power supply What happened when I plugged in a 30W power adapter and couldn't charge my mobile phone up to 30W? With the adapter plugged in, the Hub will preferentially withhold 7.5W to satisfy itself and its downstream devices, and the excess power consumption will then be charged to the Host. If the adapter power is lower than 7.5W, Host cannot charge. What mobile phones does Lexar Professional Go support? Does it support iPad? Support for iPad, the phone has a Type C port (protocol is USB3.0 or above) and supports On The Go (OTG)
Mobile phone USB output has 4.5 watts or above power consumption, iOS device system recommended iOS13 or above, Android recommended 10.0 or above Legal disclaimers
(1) Speeds based on internal testing. Actual speed may vary depending on host device.
(2) The Lexar Professional Go Portable SSD is rated IP65 and 1-meter anti-drop based on internal testing conducted under controlled conditions. Actual water, dust, and drop resistance capabilities may vary. Damage caused by liquid, dust, and drops are not covered under warrant.
Lexar is not liable for any loss of data or images.
Actual usable memory capacity may vary. 1GB equals 1 billion bytes.
Lexar ES5 Series
Lexar Professional Go Series
Lexar ES4 Series
Lexar SL500M Series
Lexar ES3 Series
Lexar SL500 Series
Lexar AR700 Series
Price History
Similar Products
